By Team Edtoolkits · Calculators
Check room units, the model’s BTU calculation and standard-size rounding before confirming capacity with an installer.
Use the guide alongside the working tool.
Open AC Tonnage Calculator →Worked example
Room: 10 ft × 10 ft; ceiling: 9 ft
Ground floor, normal sun, moderate climate, two people
Equipment: 0 W; no kitchen
Model load: 11000 BTU/h ≈ 0.917 ton
Suggested standard size: 1 tonThis example follows the calculator’s 110 BTU/h per square-foot rule. It is a rough room estimate, not a measured cooling load.
Use the tool
Enter the room length, width and ceiling height. Try a preset if you like.
Say which floor it is on, how much sun it gets and how many people use it.
Read the suggested size and the working, then ask a dealer to confirm with a site visit.
Enter the ceiling and heat sources consistently
Select feet or metres before entering dimensions. A tall ceiling, top-floor exposure, strong sun or extra occupants changes the modeled load. Equipment wattage contributes heat; it is not the electrical consumption of the proposed AC. Avoid counting the same heat source twice.
Distinguish cooling capacity from electricity use
One ton here corresponds to 12000 BTU/h of cooling. It does not mean a one-ton appliance weight or a fixed electrical power draw. Standard-size selection allows a small modeled shortfall; the next larger size is not automatically the best choice. An installer should assess windows, insulation, climate and real room conditions.
Privacy and limits
This is a rule of thumb for a single room, about 1 ton per 100 square feet for a standard room, adjusted for floor, sun, people and heat sources. It does not model walls, windows, insulation or your city's exact climate, so a site survey by an installer decides. Your inputs stay on your device.
Ready to apply this workflow?
Try AC Tonnage Calculator →Explore a related workflow
- Profit Margin Calculator: a practical guide
Price products with fees, costs and a target profit margin.
- Break-Even Analysis: Check Contribution Before Target Volume
Compare unit price, variable costs and percentage fees in a constant-cost scenario.
- Read an income-tax comparison without double-counting relief
Separate tax liability from taxes already paid and review year, income scope and deduction assumptions before relying on a comparison.
- Love Compatibility Calculator: assumptions and results
Try a playful name-pairing game for love or friendship and create a shareable card. For entertainment only.
Found unclear instructions or an unexpected result? Contact Team Edtoolkits.