← All tools
EDTOOLKITS GUIDES

Brick Estimates: Separate Nominal Size, Openings and Waste

By Team Edtoolkits · Calculators

Use joint-inclusive brick dimensions and inspect what the wall estimate omits.

Use the guide alongside the working tool.

Open Brick Calculator →

Use the tool

Add each wall's length and height, and the area of doors and windows.

Pick the brick size, wall thickness and mortar joint.

Read the bricks to order and the cement and sand for the mortar.

A comparison to try

The modular 190 by 90 by 90 mm brick with 10 mm joints occupies a nominal 200 by 100 by 100 mm grid. A 10 by 3 m half-brick wall has 2.7 cubic metres and needs 1,350 bricks before waste.

Read the result

Subtract door and window areas consistently, then apply the selected waste allowance. Nominal dimensions include joints; using bare brick volume alone overstates the count for the same wall. Mortar estimates depend on the model's mix and dry-volume assumptions.

A mistake to avoid

This covers regular plain walls, not structural design, lintels, corners or plaster. Real bonding, breakage, brick tolerance and site practice vary. Verify dimensions and ordering quantities with a qualified builder before procurement rather than treating the estimate as a construction specification.

Privacy and limits

This is an estimate for plain walls laid in a regular bond with the joint you enter. Real counts change with brick quality, breakage and site waste. Corners, lintels, plaster and the structural design are not included. Nothing you enter leaves your device.

Ready to apply this workflow?

Try Brick Calculator →

Explore a related workflow

All practical guides →

Found unclear instructions or an unexpected result? Contact Team Edtoolkits.

YOUR BROWSER, YOUR CHOICE