Small resistors have no room for numbers, so they carry coloured bands. The first bands give the digits, the next is a multiplier (a power of ten) and the last gives how far the real value may stray, the tolerance. Hold the resistor with the tolerance band (usually gold or silver) on the right and read from the left.
Band 1 is yellow: digit 4. Band 2 is violet: digit 7. Band 3 is red: multiplier ×100. Band 4 is gold: tolerance ±5%. Resistance = 47 × 100 = 4.7 kΩ, ±5%. Gold or silver on the far right usually means 5% or 10%, so you are reading from the correct end. Preferred values (E12, E24, E96) are the ones shops sell. E12 is ±10%, E24 ±5%, E96 ±1%. Red and brown, or orange and red, look alike under bad light. Check with a multimeter. IEC 60062 colour code: digits black 0 to white 9, multipliers 10⁰ to 10⁹ plus gold ×0.1 and silver ×0.01, tolerances brown ±1%, red ±2%, green ±0.5%, blue ±0.25%, violet ±0.1%, grey ±0.05%, gold ±5%, silver ±10%, none ±20%. Six-band resistors add a temperature coefficient (brown 100, red 50, orange 15, yellow 25, blue 10, violet 5 ppm/°C). E6, E12 and E24 use the published tables; E48 and E96 are the rounded values of 10^(n/48) and 10^(n/96).